RS-485 (Modbus RTU) on dEX

hendry_wu

posted Mar 23 '19 at 1:08 pm

Sir ,
How to get the RS-485 data from dEX , i only can find from "Add --> Serial --> SDI12"

Sir , How to get the RS-485 data from dEX , i only can find from "Add --> Serial --> SDI12" ![5c962f91a1c3f](serve/attachment&path=5c962f91a1c3f)

teo

posted Mar 23 '19 at 1:22 pm

Hi Hendry,
With the current firmware release you have to enter the code into a "Manual channel" entry since generic Serial / Modbus protocol isn't yet implemented in dEx.

Hi Hendry, With the current firmware release you have to enter the code into a "Manual channel" entry since generic Serial / Modbus protocol isn't yet implemented in dEx.

dataTaker Expert

posted Mar 23 '19 at 1:30 pm

Hi Hendry and Teo,

As an addition info, you need to access the very top of dEX tree view and select "Sensor Port" to set the port setting. While the syntax must be built on Manual Channel as there is no template for RS485 string in dEX.

Best regards,
Rudy Gunawan

Hi Hendry and Teo, As an addition info, you need to access the very top of dEX tree view and select "Sensor Port" to set the port setting. While the syntax must be built on Manual Channel as there is no template for RS485 string in dEX. Best regards, Rudy Gunawan

Pending draft

Selected posts

Confirm move posts

Insufficient permissions

Select a different topic

Confirm selection

Edit history