Support Forums
DataTaker DT85G-3 Unable to show Schedules through dEX-2

I have a DT85G-3 device connected by ethernet to a Windows Server 2016 PC. I am using dEX-2 to communicate with the device.

The device will periodically connect, show me the clock time and show me its data if I go to the Data Explorer. I can see that it is running Software Version 9.20.8942.

In particular I am trying to see the Schedules loaded on the device, which seem to be getting sent. I can see the following in the console:

BEGIN"config"' Generated by dEX Configuration Builder Version 1.84.030 (Firmware Version 9.20.8942)' Target device: DT85G-3  password=""  RS1S  RA"Schedule_1"("b:",ALARMS:OV:100KB:W60,DATA:OV:30D)10M    LOGONA    DO{copyd dest="ftp://PC_Name:[email protected]_IP_Address:Port?priority=NORMAL&interface=ETHERNET" format=CSV sched= data=Y alarms=N start=new}  RB"Schedule_2"("b:",ALARMS:OV:100KB:W60,DATA:OV:30D)21M    LOGONB    DO{copyd dest="ftp://PC_Name:[email protected]_IP_Address:Port/\ExtraData/?priority=NORMAL&interface=ETHERNET" format=CSV sched= data=Y alarms=N start=new}END

However, the above information doesn't get imported into the dEX-2 GUI.

When I run the 'Test Connectivity' I end up seeing multiple 'Heartbeating Device' messages, and then the following error in the Development Tools Console:

Error: Parse error on line 1:
...rms=N start=new}END
----------------------^
Expecting 'PASSWORD', 'SN', 'YN', 'TN', 'CHANNEL', 'CHANNEL_INITIALIZATION', 'SCHEDULE_ID', 'LOG', 'ALARM', 'DO_WORD', 'MANUAL_START', got 'EOF'
    at on.parseError (main.54ddba9….js:1)
    at on.parse (main.54ddba9….js:1)
    at Object.n.parse (main.54ddba9….js:1)
    at main.54ddba9….js:1
    at e.invoke (polyfills.f17119b….js:1)
    at Object.onInvoke (main.54ddba9….js:1)
    at e.invoke (polyfills.f17119b….js:1)
    at t.run (polyfills.f17119b….js:1)
    at polyfills.f17119b….js:1
    at e.invokeTask (polyfills.f17119b….js:1)

and eventually a pop-up saying "DXC Compilation Error", with the Console reading:

Compilation failure

Are there any known solutions be able to connect to my device using dEX-2?

Thanks in advance,

I have a DT85G-3 device connected by ethernet to a Windows Server 2016 PC. I am using dEX-2 to communicate with the device. The device will periodically connect, show me the clock time and show me its data if I go to the Data Explorer. I can see that it is running Software Version 9.20.8942. In particular I am trying to see the Schedules loaded on the device, which seem to be getting sent. I can see the following in the console: ```` BEGIN"config"' Generated by dEX Configuration Builder Version 1.84.030 (Firmware Version 9.20.8942)' Target device: DT85G-3 password="" RS1S RA"Schedule_1"("b:",ALARMS:OV:100KB:W60,DATA:OV:30D)10M LOGONA DO{copyd dest="ftp://PC_Name:[email protected]_IP_Address:Port?priority=NORMAL&interface=ETHERNET" format=CSV sched= data=Y alarms=N start=new} RB"Schedule_2"("b:",ALARMS:OV:100KB:W60,DATA:OV:30D)21M LOGONB DO{copyd dest="ftp://PC_Name:[email protected]_IP_Address:Port/\ExtraData/?priority=NORMAL&interface=ETHERNET" format=CSV sched= data=Y alarms=N start=new}END ```` However, the above information doesn't get imported into the dEX-2 GUI. When I run the 'Test Connectivity' I end up seeing multiple 'Heartbeating Device' messages, and then the following error in the Development Tools Console: ```` Error: Parse error on line 1: ...rms=N start=new}END ----------------------^ Expecting 'PASSWORD', 'SN', 'YN', 'TN', 'CHANNEL', 'CHANNEL_INITIALIZATION', 'SCHEDULE_ID', 'LOG', 'ALARM', 'DO_WORD', 'MANUAL_START', got 'EOF' at on.parseError (main.54ddba9….js:1) at on.parse (main.54ddba9….js:1) at Object.n.parse (main.54ddba9….js:1) at main.54ddba9….js:1 at e.invoke (polyfills.f17119b….js:1) at Object.onInvoke (main.54ddba9….js:1) at e.invoke (polyfills.f17119b….js:1) at t.run (polyfills.f17119b….js:1) at polyfills.f17119b….js:1 at e.invokeTask (polyfills.f17119b….js:1) ```` and eventually a pop-up saying "DXC Compilation Error", with the Console reading: ```` Compilation failure ```` Are there any known solutions be able to connect to my device using dEX-2? Thanks in advance,

Hi karthikv,

I am guessing the program that you have in the screenshot was created using the old deX or dEX 1.0. There is no direct conversion from dEX 1.0to dEX 2.0, you will need to do it manually. Please check this link for conversion information:
https://datatakerforum.com/Documents/Resources/TN0064%20-%20Converting%20the%20Existing%20Text%20Program%20to%20dEX%202%20Compatible.pdf

Best regards,
dataTaker Expert

Hi karthikv, I am guessing the program that you have in the screenshot was created using the old deX or dEX 1.0. There is no direct conversion from dEX 1.0to dEX 2.0, you will need to do it manually. Please check this link for conversion information: https://datatakerforum.com/Documents/Resources/TN0064%20-%20Converting%20the%20Existing%20Text%20Program%20to%20dEX%202%20Compatible.pdf Best regards, dataTaker Expert
21
1
2
live preview
enter atleast 10 characters
WARNING: You mentioned %MENTIONS%, but they cannot see this message and will not be notified
Saving...
Saved
With selected deselect posts show selected posts
All posts under this topic will be deleted ?
Pending draft ... Click to resume editing
Discard draft