Legacy Hardware and Apps
Datataker DT85g series 2 denied permissions and please help with a basic test program

Hi all.
18 months ago I managed to set up a datataker DT85G so that it would measure voltages of up to 3 volts on 12 inputs at 1 minute intervals.
I have another logger to try to do the same thing to and cannot find my documentation.
It took me a week last time to trawl through the manual and work out what I had to do and it pains me to spend another week on this.

Just to compound things when I powered up this logger for the first time it loaded whatever was the last job that it had and when I tried to use the "H" command to stop it doing whatever it was doing it returned me a Permission denied statement.

Does this mean that is has been password locked.

I am connected via a terminal on a direct usb connection to the unit.

If the unit is password protected how can I reset it ( anyone who knew how to program these seems to have left the organization years ago ).

Any suggestions gratefully received and cookies and coffee will be owed

Hi all. 18 months ago I managed to set up a datataker DT85G so that it would measure voltages of up to 3 volts on 12 inputs at 1 minute intervals. I have another logger to try to do the same thing to and cannot find my documentation. It took me a week last time to trawl through the manual and work out what I had to do and it pains me to spend another week on this. Just to compound things when I powered up this logger for the first time it loaded whatever was the last job that it had and when I tried to use the "H" command to stop it doing whatever it was doing it returned me a Permission denied statement. Does this mean that is has been password locked. I am connected via a terminal on a direct usb connection to the unit. If the unit is password protected how can I reset it ( anyone who knew how to program these seems to have left the organization years ago ). Any suggestions gratefully received and cookies and coffee will be owed
edited Jul 4 '24 at 9:13 am

Hi Tim,

If you still need help, feel free to call me for assistance. Eastern Australian business hours.

Regards,

Michael Hampson
Lontek
+61 2 4739 8400

Hi Tim, If you still need help, feel free to call me for assistance. Eastern Australian business hours. Regards, Michael Hampson Lontek +61 2 4739 8400

Michael Hampson Lontek https://www.lontek.com.au/

35
1
2
live preview
enter atleast 10 characters
WARNING: You mentioned %MENTIONS%, but they cannot see this message and will not be notified
Saving...
Saved
With selected deselect posts show selected posts
All posts under this topic will be deleted ?
Pending draft ... Click to resume editing
Discard draft