General Discussions
Pulse Flowmeter

We need a simple way to totalizer a slow pulse from water meters and the same time reset counter each datalogging. Reset is easy using dEX with “Reset Counter”, but ”doesn’t exist the “Totalizer Counter for ever”

Thanks in advance

We need a simple way to totalizer a slow pulse from water meters and the same time reset counter each datalogging. Reset is easy using dEX with “Reset Counter”, but ”doesn’t exist the “Totalizer Counter for ever” Thanks in advance

Hi Gonzalo,

You may use difference (DF) option for counter channel, it will calculate the difference between current and previous reading. Then you can add calculation channel which increment the difference on each measurement cycle.

And reset can be applied to that calculation channel at specific interval.

Best regards,
Rudy Gunawan

Hi Gonzalo, You may use difference (DF) option for counter channel, it will calculate the difference between current and previous reading. Then you can add calculation channel which increment the difference on each measurement cycle. And reset can be applied to that calculation channel at specific interval. Best regards, Rudy Gunawan
44
1
2
live preview
enter atleast 10 characters
WARNING: You mentioned %MENTIONS%, but they cannot see this message and will not be notified
Saving...
Saved
With selected deselect posts show selected posts
All posts under this topic will be deleted ?
Pending draft ... Click to resume editing
Discard draft