Hi all,

I am running a DT85 with CANGate attached, GPS & CAN 1 connected to J1939 Vehicle BUS. How do I show what's snooping on the can in real time - so I can ensure I have the correct PGN & parameters for the things I am trying to monitor?

Thanks,
Gareth

To be a little more specific, I am in the text window in DeLogger, attempting to type the commands as shown in the start here guide, but I am getting multitudes of errors back: -

I get errors, 10, 105, 32, & 12 when I try to connect...

Mark Fisher @ Grant has helped me out, - when I clicked on the Channel 1 direct button, it hadn't clicked when I thought it had! - I didn't realize you would see a message in the top window saying:

"SSDIRECT mode active. Issue ENDSSDIRECT to quit"

So I kept getting:

"Error: [ SNOOPJ <err> ]"

But now everything is OK!! I now get:

EXT 0C000021 01501E000021FF7D PGN:0 PRI:3 SA:33 DA:0
EXT 0CF00400 FC7D7D000021FF7D PGN:61444 PRI:3 SA:0 DA:0
EXT 0CF00300 D10000FFFFFFFFFF PGN:61443 PRI:3 SA:0 DA:0
EXT 18FEF200 000000FEFFFFFFFF PGN:65266 PRI:6 SA:0 DA:0
EXT 18FEF100 F300000CFF0000FF PGN:65265 PRI:6 SA:0 DA:0
EXT 18FEBD00 00FFFFFFFFFFFFFF PGN:65213 PRI:6 SA:0 DA:0
EXT 18FEE400 FFFFFCFCFFFFFFFF PGN:65252 PRI:6 SA:0 DA:0
EXT 18FEEE00 38396924FFFFFFFF PGN:65262 PRI:6 SA:0 DA:0
EXT 18FEEF00 FFFFFF00FFFFFFFF PGN:65263 PRI:6 SA:0 DA:0
EXT 18FEF500 CDFFFFFFFFFFFFFF PGN:65269 PRI:6 SA:0 DA:0
EXT 18FEF600 FF003CFFFFFFFFFF PGN:65270 PRI:6 SA:0 DA:0
EXT 18FEF700 FFFFFFFFF700F700 PGN:65271 PRI:6 SA:0 DA:0
EXT* 18ECFF00 201C0004FFE3FE00 PGN:65251 PRI:6 SA:0 DA:255 LEN:28
EXT 18FECA00 00FF00000000FFFF PGN:65226 PRI:6 SA:0 DA:0
END SNOOP

Much more like what I wanted!

Can this be done via an SMSX modem connection?

Good morning Gareth,

Yes you should be able to. Just remember to get out of snoop mode when you finish.

Cheers,
Roger