Hello,
I am having an issue where the DT85M occasionally stops logging and the commands stop working. When I try to send commands I get a "Permission Denied" response, even though I am logged in as an admin.
I am getting a lot of E9, E10 and E12 errors. From a previous forum post it looks like it could be caused by commands leaked through the network. However, I have commands password protected. It looks like it stopped logging after I logged in with the admin account. Is it possible that its receiving commands from elsewhere on the network when I'm logged in as an admin?
Is there any way to prevent this from happening other than to avoid using an admin account when using DEX?
I have posted a section of the errors below.
Thanks.

EVENT   ,2021/11/16,09:02:00,0.542114,"User: admin successfully logged in"
EVENT   ,2021/11/16,09:06:15,0.405151,"E10 - Command error at column 1 [ <err>JRMIK# ]"
EVENT   ,2021/11/16,09:06:17,0.499267,"E10 - Command error at column 3 [ GE<err>T / HTTP/1 ]"
EVENT   ,2021/11/16,09:06:17,0.559204,"E9 - Switch error at column 6 [ GET /<err> HTTP/1.0 ]"
EVENT   ,2021/11/16,09:06:17,0.653930,"E10 - Command error at column 8 [ GET / H<err>TTP/1.0 ]"
EVENT   ,2021/11/16,09:06:19,0.592773,"E10 - Command error at column 1 [ <err>OPTIONS /  ]"
EVENT   ,2021/11/16,09:06:19,0.648315,"E9 - Switch error at column 10 [ OPTIONS /<err> HTTP/1.0 ]"
EVENT   ,2021/11/16,09:06:19,0.890380,"E10 - Command error at column 12 [ PTIONS / H<err>TTP/1.0 ]"
EVENT   ,2021/11/16,09:06:21,0.788330,"E10 - Command error at column 1 [ <err>OPTIONS /  ]"
EVENT   ,2021/11/16,09:06:21,0.861083,"E9 - Switch error at column 10 [ OPTIONS /<err> RTSP/1.0 ]"
EVENT   ,2021/11/16,09:06:21,0.923950,"E10 - Command error at column 11 [ OPTIONS / <err>RTSP/1.0 ]"
EVENT   ,2021/11/16,09:06:29,0.069580,"B:\EVENTS\EVENT.LOG created"
EVENT   ,2021/11/16,09:06:29,0.160278,"B:\EVENTS\EVENT.LOG backed up to B:\EVENTS\EVENT.BAK"
EVENT   ,2021/11/16,09:06:29,0.195922,"E10 - Command error at column 1 [ <err>(r ]"
EVENT   ,2021/11/16,09:06:32,0.669555,"E10 - Command error at column 1 [ <err>SO?G ]"
EVENT   ,2021/11/16,09:06:32,0.719726,"E10 - Command error at column 51 [ edcba` <err>*%Co ]"
EVENT   ,2021/11/16,09:06:32,0.770996,"E10 - Command error at column 67 [ %Cookie: <err>mstshash=b ]"
EVENT   ,2021/11/16,09:06:34,0.688476,"E10 - Command error at column 1 [ <err>ie ]"
EVENT   ,2021/11/16,09:06:41,0.491088,"E10 - Command error at column 1 [ <err>,* ]"
EVENT   ,2021/11/16,09:06:41,0.543457,"E10 - Command error at column 159 [ @@PC <err>NETWORK PR ]"
EVENT   ,2021/11/16,09:06:41,0.597534,"E10 - Command error at column 167 [ C NETWORK <err>PROGRAM 1. ]"
EVENT   ,2021/11/16,09:06:41,0.649780,"E12 - Channel list error at column 176 [  PROGRAM 1<err>.0MICROSO ]"
EVENT   ,2021/11/16,09:06:41,0.700805,"E10 - Command error at column 189 [ MICROSOFT <err>NETWORKS 1 ]"
EVENT   ,2021/11/16,09:06:41,0.763671,"E12 - Channel list error at column 199 [ NETWORKS 1<err>.03MICROS ]"
EVENT   ,2021/11/16,09:06:41,0.814208,"E10 - Command error at column 213 [ MICROSOFT <err>NETWORKS 3 ]"
EVENT   ,2021/11/16,09:06:41,0.868652,"E12 - Channel list error at column 223 [ NETWORKS 3<err>.0LANMAN1 ]"
EVENT   ,2021/11/16,09:06:41,0.920043,"E10 - Command error at column 255 [ SambaNT <err>LANMAN 1.0 ]"
EVENT   ,2021/11/16,09:06:41,0.979003,"E12 - Channel list error at column 263 [ T LANMAN 1<err>.0NT LM 0 ]"
EVENT   ,2021/11/16,09:06:42,0.030151,"E10 - Command error at column 269 [ AN 1.0NT <err>LM 0.12lG ]"
EVENT   ,2021/11/16,09:06:42,0.081298,"E12 - Channel list error at column 273 [ .0NT LM 0<err>.12lGET / ]"
EVENT   ,2021/11/16,09:06:42,0.289672,"E10 - Command error at column 284 [ 12lGET /n<err>ice%20port ]"
EVENT   ,2021/11/16,09:06:42,0.520629,"E10 - Command error at column 320 [ xt%2ebak H<err>TTP/1.0 ]"
EVENT   ,2021/11/16,09:06:49,0.586181,"E10 - Command error at column 1 [ <err>default0 ]"
EVENT   ,2021/11/16,09:06:49,0.674682,"E10 - Command error at column 63 [ OPTIONS <err>sip:nm SIP ]"
EVENT   ,2021/11/16,09:06:49,0.732421,"E10 - Command error at column 70 [ NS sip:nm <err>SIP/2.0 ]"
EVENT   ,2021/11/16,09:06:49,0.790039,"E10 - Command error at column 1 [ <err>Via: SIP/2 ]"
EVENT   ,2021/11/16,09:06:49,0.844848,"E10 - Command error at column 6 [ Via: <err>SIP/2.0/TC ]"
EVENT   ,2021/11/16,09:06:49,0.895141,"E10 - Command error at column 18 [ P/2.0/TCP <err>nm;branch= ]"
EVENT   ,2021/11/16,09:06:49,0.950195,"E10 - Command error at column 21 [ .0/TCP nm;<err>branch=foo ]"
EVENT   ,2021/11/16,09:06:50,0.010864,"E10 - Command error at column 1 [ <err>From: <sip ]"
EVENT   ,2021/11/16,09:06:50,0.062255,"E10 - Command error at column 7 [ From: <err><sip:nm@nm ]"
EVENT   ,2021/11/16,09:06:50,0.113281,"E10 - Command error at column 19 [ ip:nm@nm>;<err>tag=root ]"

Hi MichaelH,

Apology for the very long response delay; there was some new arrangement in the office.

When you log in as the admin, the logger will release the security on port 7700 of the command interface. This release will happen only for 10 minutes (default parameters P14 is 600 seconds) if the command interface receives no new command even though you are still within the dEX software.

When the security is released, there will be a leak from the network going to port 7700. You can change the command port into another number, such as 7777, reducing the leaking. However, changing the port number will disable access on the command interface in dEX 2.0 as the port setting was hardcoded.

Best regards,
dataTaker Expert