Distance between base and CEM

Tom

posted Apr 17 '19 at 2:45 am

Hi dataTakers,

We are adding a new CEM and to an existing logger for probes that are about 50 metres from the logger. Will there be problems with signal loss etc if we make a base the CEM near the probes and make a longer CEM to base connection. ie use only one long CEM to dt80 cable vs long cables for 18 sensors.

Thanks
Tom

Hi dataTakers, We are adding a new CEM and to an existing logger for probes that are about 50 metres from the logger. Will there be problems with signal loss etc if we make a base the CEM near the probes and make a longer CEM to base connection. ie use only one long CEM to dt80 cable vs long cables for 18 sensors. Thanks Tom

Roger

posted Apr 17 '19 at 3:05 am

Good afternoon Tom,

The maximum distance between the DT80 and the last CEM20 is 100 m.
Note The CEM20's Must be connected as a daisy chain (Shown in manual) they can not be connected in a star configuration.

Cheers,
Roger

Good afternoon Tom, The maximum distance between the DT80 and the last CEM20 is 100 m. Note The CEM20's Must be connected as a daisy chain (Shown in manual) they can not be connected in a star configuration. Cheers, Roger

Pending draft

Selected posts

Confirm move posts

Insufficient permissions

Select a different topic

Confirm selection

Edit history