Hi,

I cannot find anywhere in the DT8x users manual any information regarding the detail of each message sent from a logger in fixed format mode. An advanced communication manual exists for the DT500 but I cannot find any similar information for our DT85-2. e.g.:

C,090696,2010/12/29,13:17:02,0.449707,1;41,"UNTITLED";0054;8E30 
C,090696,2010/12/29,13:17:02,0.577148,201;42,"UNTITLED";0056;B9AC 
C,090696,2010/12/29,13:17:02,0.589233,102;43,"UNTITLED";0056;A178 
C,090696,2010/12/29,13:17:04,0.848388,13;44,"UNTITLED";0055;7B4B

Program change code 201, 102 and 13? What does it mean?
Thx in advance

Good morning Heinek,

The fixed format mode is used by DeLogger to ensure a consistent data format.

As DeLogger has been replaced by dEX it is far less important that previous and you will find it much easier to use CSV data format as it can be imported directly into any spread sheet or data base.

Cheers,
Roger

Good morning Heinek,

Program change messages:

1 BEGIN detected 
2 PC card inserted 
3 PC card removed 
4 PC card updated successfully with data from internal RAM disk 
5 Failed to update PC card with data from internal RAM disk 
6 PC card has entered its error state 
10 Job cleared 
11 /w (work flag) cleared. 
12 /W (work flag) set. 
13 END detected. BEGIN ... ... END block seen 
14 Job data deleted 
15 Job alarms deleted 
16 Job deleted 
17 Job set to run on reset 
20 PC card cleared successfully. 
21 PC card clear failed. 
22 Internal RAM disk cleared successfully. 
23 Internal RAM disk clear failed. 
24 B:\INI\USER.INI deleted 
25 ONRESET.DXC ("on reset" job) deleted 
26 Flash backup of B:\INI\USER.INI deleted 
27 Flash backup of ONRESET.DXC deleted 
28 DELONINSERTALL processed. All ONINSERT.DXC files deleted. 
29 DELONINSERT processed. A:\SNxxxxxx\ONINSERT.DXC deleted. 
30 Job locked 
31 Job unlocked 
100 Internal error in mapping schedules 
101 Channel list for immediate schedule changed 
102 Channel list for X schedule changed 
103 Channel list for A schedule changed 
104 Channel list for B schedule changed 
105 Channel list for C schedule changed 
106 Channel list for D schedule changed 
107 Channel list for E schedule changed 
108 Channel list for F schedule changed 
109 Channel list for G schedule changed 
110 Channel list for H schedule changed 
111 Channel list for I schedule changed 
112 Channel list for J schedule changed 
113 Channel list for K schedule changed 
200 Internal error in mapping schedules 
201 A change has been made to the X schedule 
202 A change has been made to the A schedule 
203 A change has been made to the B schedule 
204 A change has been made to the C schedule 
205 A change has been made to the D schedule 
206 A change has been made to the E schedule 
207 A change has been made to the F schedule 
208 A change has been made to the G schedule 
209 A change has been made to the H schedule 
210 A change has been made to the I schedule 
211 A change has been made to the J schedule 
212 A change has been made to the S schedule 
213 A change has been made to the K schedule 
300 All schedules halted (H issued). 
301 Schedule x halted (HX) 
302 Schedule A halted (HA) 
303 Schedule B halted (HB) 
304 Schedule C halted (HC) 
305 Schedule D halted (HD) 
306 Schedule E halted (HE) 
307 Schedule F halted (HF) 
308 Schedule G halted (HG) 
309 Schedule H halted (HH) 
310 Schedule I halted (HI) 
311 Schedule J halted (HJ) 
312 Schedule K halted (HK) 
313 Schedule Z halted (HZ) 
350 Logging turned off for all schedules 
351 Logging turned off for X schedule 
352 Logging turned off for A schedule 
353 Logging turned off for B schedule 
354 Logging turned off for C schedule 
355 Logging turned off for D schedule 
356 Logging turned off for E schedule 
357 Logging turned off for F schedule 
358 Logging turned off for G schedule 
359 Logging turned off for H schedule 
360 Logging turned off for I schedule 
361 Logging turned off for J schedule 
362 Logging turned off for K schedule 
400 All schedules (re)started 
401 Schedule A (re)started 
402 Schedule B (re)started 
403 Schedule C (re)started 
404 Schedule D (re)started 
405 Schedule E (re)started 
406 Schedule F (re)started 
407 Schedule G (re)started 
408 Schedule H (re)started 
409 Schedule I (re)started 
410 Schedule J (re)started 
411 Schedule K (re)started 
412 Schedule S (re)started 
413 Schedule Z (re)started 
450 Logging turned on for all schedules 
451 Logging turned on for X schedule 
452 Logging turned on for A schedule 
453 Logging turned on for B schedule 
454 Logging turned on for C schedule 
455 Logging turned on for D schedule 
456 Logging turned on for E schedule 
457 Logging turned on for F schedule 
458 Logging turned on for G schedule 
459 Logging turned on for H schedule 
460 Logging turned on for I schedule 
461 Logging turned on for J schedule 
462 Logging turned on for K schedule 
501 Not used 
502 Not used 
503 Not used 
504 Not used 
600 Dollar string changed. n$ results in change message number 600 + n 
700 Parameter changed. Pn results in change message number 700 + n 
800 Polynomial or span changed. Yn or Sn results in change message 800 + n. 
900 Thermistor changed. Tn results in change message number 900 + n.

Cheers,
Roger

Hi Roger,

Thanks a lot, this is very helpful for us !

Best regards