Support Forums
M2M Sim

I have M2M(Machin to Machin) Sim with 13 digit number,
We want to access the datalogger through this SIM
also we have SIM based router so please guide and suggest how we can used this SIM to access the Datataker with or without modem datalogger

Best Regards,
Pratik A

I have **M2M**(Machin to Machin) Sim with 13 digit number, We want to access the datalogger through this SIM also we have SIM based router so please guide and suggest how we can used this SIM to access the Datataker with or without modem datalogger Best Regards, Pratik A

Hi Pratik,

When you said "access the logger through this SIM", I am guessing you want to gain connection to the logger remotely via a mobile network. For a remote connection, you will need to get a public IP address from the network provider on the SIM card.

Please check with the provider how to get a public address and please note not all provider can give you a public address. Then in the router you need to set port forwarding. Port forwarding function is bridging public IP address (own by the provider) to local address (connection between the router and the logger) through selected port.

You need to set at least port 80 (web) and 7700 (command) for port forwarding, port 21 (FTP) and 502 (MODBUS) are applicable if you want to use them.

Then every time you access that public address via those selected ports you will directly access the logger.

Best regards,
Rudy Gunawan

Hi Pratik, When you said "access the logger through this SIM", I am guessing you want to gain connection to the logger remotely via a mobile network. For a remote connection, you will need to get a public IP address from the network provider on the SIM card. Please check with the provider how to get a public address and please note not all provider can give you a public address. Then in the router you need to set port forwarding. Port forwarding function is bridging public IP address (own by the provider) to local address (connection between the router and the logger) through selected port. You need to set at least port 80 (web) and 7700 (command) for port forwarding, port 21 (FTP) and 502 (MODBUS) are applicable if you want to use them. Then every time you access that public address via those selected ports you will directly access the logger. Best regards, Rudy Gunawan
65
1
2
live preview
enter atleast 10 characters
WARNING: You mentioned %MENTIONS%, but they cannot see this message and will not be notified
Saving...
Saved
With selected deselect posts show selected posts
All posts under this topic will be deleted ?
Pending draft ... Click to resume editing
Discard draft