Legacy Hardware and Apps
Serial DT800

Hi,

I have 2 DT800 of which all channels are connected with sensors. I wish to download the data from both DT800 but with one download so I do not have to Integrate 2 sets of data hence have one download with both DT800 data.

What is the best option to achieve this. I had looked at connecting DT800 1 which has 12 PT100 sensors connected, to DT800 2 by the serial channel.

I am familiar with Delogger 5 which I generally use for programming, therefore can you advise if this serial connection is the best method to achieve the single data download and if so how do i program/retrieve the data from DT800 1 to DT800 2 using Delogger 5.

Hi, I have 2 DT800 of which all channels are connected with sensors. I wish to download the data from both DT800 but with one download so I do not have to Integrate 2 sets of data hence have one download with both DT800 data. What is the best option to achieve this. I had looked at connecting DT800 1 which has 12 PT100 sensors connected, to DT800 2 by the serial channel. I am familiar with Delogger 5 which I generally use for programming, therefore can you advise if this serial connection is the best method to achieve the single data download and if so how do i program/retrieve the data from DT800 1 to DT800 2 using Delogger 5.

Good afternoon sralph,

I would use the serial sensor port to combine the data. Set the output format to known format and work from there.

Cheers,
Roger

Good afternoon sralph, I would use the serial sensor port to combine the data. Set the output format to known format and work from there. Cheers, Roger

Hi Roger,
Thank you for your input. Is there any program examples for this or can you offer any further information as to how i should program this through Delogger.

Stephen

Hi Roger, Thank you for your input. Is there any program examples for this or can you offer any further information as to how i should program this through Delogger. Stephen

Good morning sralph,

No specific examples for connecting 2 DT800's but there is an example of the same for thing for a DT500 connected to a DT80.

Please check the last item from this link:
http://www.thermofisher.com.au/show.aspx?page=/ContentAUS/Manufacturing-Processing/Industrial-Loggers/DataTaker/DataTaker-FAQ/Program-Code/General-Codes.html

The cabling between the two will be different but the general code will be quite similar.

Cheers,
Roger

Good morning sralph, No specific examples for connecting 2 DT800's but there is an example of the same for thing for a DT500 connected to a DT80. Please check the last item from this link: http://www.thermofisher.com.au/show.aspx?page=/ContentAUS/Manufacturing-Processing/Industrial-Loggers/DataTaker/DataTaker-FAQ/Program-Code/General-Codes.html The cabling between the two will be different but the general code will be quite similar. Cheers, Roger
50
3
2
live preview
enter atleast 10 characters
WARNING: You mentioned %MENTIONS%, but they cannot see this message and will not be notified
Saving...
Saved
With selected deselect posts show selected posts
All posts under this topic will be deleted ?
Pending draft ... Click to resume editing
Discard draft