I have set up a digital counter for a flow meter on D1 on my DT85G and was wondering if anyone had a command for restting the counter to zero without having to stop the logging.
Pratik
posted Feb 11 '21 at 5:41 am
I have M2M(Machin to Machin) Sim with 13 digit number,
We want to access the datalogger through this SIM
also we have SIM based router so please guide and suggest how we can used this SIM to access the Datataker with or without modem datalogger
Best Regards,
Pratik A
I am new to these loggers and have aquired a DT85G series 2. I am in the initial setup stage and can not get communication with the logger via USB or any other connection using dex-2. I am able to connect via the transfer terminal. I have the latest firmware installed and have DTusb as well. I am not sure what I am missing as I can see both connections in the COM ports and universal serial bus co
Matteo
posted Dec 14 '20 at 8:57 am
Hi everyone, I´m trying to use a Cangate to communicate with a Steyr tractor. I can use the snoopj command to see all the broadcasted data and that works fine but when I try to use the RQSTJ command to ask the ECU some PGN I didn´t get an answer. I tried also with common PGNs as 61444 for example but nothing. Maybe the ECU is protected? Is there a mandatory set of PGNs the manufactor
Hi,
Recently i notice and read that to be able to see the configuration of your DT80 on the web is to migrate it in DEX2. Does it mean you will not be able to open the web portal since Adobe Flash is already EOL? Besides using DEX2 what other alternative can we use if we want to access the GUI on Web portal as we are accessing the dt80 via internet. Hope for your kind response. Thanks
i have problem when loading a program from a saved file.everytime i load the program,it will alter the calculation output(result) that will cause error when uploading the program to datataker.so everytime i want to resend the program to datataker,i need to re-do the calculation one by one. hope for a solution for this .thank you
ERIX
posted Jan 28 '21 at 8:15 am
Good day
I am working with the DT85W Series 4 (V9.22).
I want to create an "internal graph" while the program is running using the following equation:
=345*LOG((8xTime)+1)+Ambient temperature
I think I will be able to create the graph but I do not know how to create "Time" to be a variable.
On the DT500 there was an option to create a channel named "Time Variable". This allow
Hi,
This is the updated dEX 2.0.
Please find the installer download link:
Windows version:
https://datatakerforum.com/Documents/Applications/dEX-2%20Setup%202.1.18.exe
Mac version:
https://datatakerforum.com/Documents/Applications/dEX-2-2.1.18.dmg
Linux:
https://datatakerforum.com/Documents/Applications/dEX-2-2.1.18.tar.gz
Linux/ Debian:
https://datatakerforum.c
AHardy
posted Jan 19 '21 at 9:42 am
Hi,
I have been trying to use dex-2 to connect to our DT85Ms. I am using a USB cable straight into the device.
When I try to connect, using the port and IP address from DtUSB, it will not find the device. Looking at the code found in the "Development Tools", it keeps throwing back a 403 error. Specifically:
"Failed to load resource: the server responded with a status of 403 (Forbi
Pratik
posted Jan 19 '21 at 10:37 am
We have to do auto shunt calibration process through program.
For example,
If we have Strain-1, then after offset removing process as we connect the 17134 Ohm or 174650 Ohm then strain value must come as 10000 or 1000 macrostrain, but unfortunately there again some offset for individual channel offset id differ from each other, So we want to remove this offset ,
Please suggest and suppor
Hello,
is it possible to use the dEX2.0 software together with the dEX webversion? Since we use the software, the webversion stays empty.
We use text-based programmes, but the command line interface of the software has a limited amount of characters, so we can't send a complete programme. In the webversion, this worked fine.
Best regards
Paul
SJRJ
posted Jan 23 '21 at 6:02 pm
Can anyone please give me an idea about how we connect three wire strain gauges to the data taker and what bridge configuration we should follow? I am using a DT85 model data taker.
If anyone can explain the basic things related to this or provide some useful links, it would be a great help as I am very new to data taker.
Thank You.
PRS
posted Jan 21 '21 at 8:48 am
How do I save a program file to my PC, rather than the logger, using dEX2?
Dear Team,
I'm facing to the Flash that is out of date. I can not access to Dex software to configure data taker DT80. Please help to instruct me to configure it.
Thanks
Sang
Is there method could allow us to add more schedule in the program. now the schedule limit is A - K.
Hi,
I've been using a DT85 series 4 for logging several 4:20mA signals, and I'm configuring the DT-85 using DEX-2.
the DT85 had displayed all the signal correctly on its display, however when I tried sending a CSV file using FTP, nothing was sent to the FTP server.
her is the DXC
BEGIN"config"
'Generated by new dEX-2
password=""
S1=0,500,4,20""
S2=0,5000,4,20""
Dear Team,
I'm facing to the Flash that is out of date. I can not access to Dex software to configure data taker DT80. Please help to instruct me to configure it.
Thanks
Sang
Mike08
posted Nov 17 '20 at 8:30 pm
I am monitoring an air conditioning system for occasional trips of the compressor overload. While monitoring all the usual things like temperatures and pressures and compressor current at 30 second intervals, I also want to monitor the three compressor current transducers "as fast as possible" for 2 seconds following the contactor closure. I've looked at scanning fast in the manual (under "Contin
Gordon
posted Dec 14 '20 at 9:53 am
Is there any way to input a value into a CV variable via the front screen display and function buttons on a DT85?
Hi, I use DT80W-S4 to measure analog (4-20mA) Water Level Sensor. When I calculate the mA that DataTaker measure is different from what the sensor output mA. How to make DT measure the same mA value as what sensor output? I did adjust the ohm of the 100ohm resistor but the resistor value only can be input round number.
markf
posted Dec 8 '20 at 8:56 pm
Good morning,
it was setup the DT80 is now saying offline and the comms light is yellow.
Just wondering if this is the same issue.
"67
Alarm action will cause an error in the channel thus no editing is possible."
If so what is the fix?
Florian
posted Dec 3 '20 at 8:21 am
Hello i habe trouble with my Programm on my DT85M
Actually it is my first Project with a Datataker
I need to read 200 soil moisture sensors.
Each sensor has 4 variables to measure
175 of them are with modbus where i have to recalculate 2 of the values
25 are with SDI12
The Sensors work and i can communicate with all of them.
So i have 1150 values to measure with this sensor
markf
posted Dec 1 '20 at 12:55 am
Hi was wondering how you can save the configuration to disk so it can be accessed at anytime (as backup) or downloaded in the datataker.
Refer to page 117 in the user manual for the old flash version.
bill_p
posted Nov 26 '20 at 1:38 am
Hi
I need advise on connecting the pulse output from Burkert SE35 Flow Transmitter to counter input of DT80 please.
Link to the transmitter docs https://www.burkert.co.nz/en/type/SE35
Thanks
Bill
marjub
posted Nov 17 '20 at 8:10 pm
While troubleshooting a strange voltage reading on a DT85 S3, I narrowed it down to this. When I measured the reading outside of a schedule, it measured the voltage correctly. When the same line of code was used in a schedule, it measured the incorrect value.
Actual voltage measured with a Fluke multimeter at the DT85
terminals: 44.7 mV
Voltage manually measured by DT85 in DeTransfer without
Florian
posted Nov 10 '20 at 12:38 pm
Hello i am new with Datataker
I just installed dex 2.1.18 but it does not find my DT85M.
With firefox and the Flash player i can programm and find the Logger, but it works awfully slow.
The logger is connected via USB.
dtUSB shows the loggers IP.
I would be very pleased if somebody can give me a hint what's wrong with my setup.
I use Windows 10 Logger firmware version is 9.2
how to download data in csv from data taker;DT80 with thumb drive
Hi,
Adobe Flash Player's end of life date is set to 31 december 2020. In my University, we rely on it in order to use dEx. I would like to know what solutions datataker is providing to adress this issue ? I've lookep this forums's threads but couldn't find any about this.
Regards,
ajrai
posted Nov 11 '20 at 4:10 am
Hi,
Can the Ethernet Port on the DT85 be used to send a Modbus command to a TCP/IP Modbus Server Device (e.g. Sensor configured as TCP/IP Modbus Server) as well as receive a Modbus command from the TCP/IP Modbus Client Device (e.g. SCADA) simultaneously?
Thanks.
AJ
Dear,
I'm trying to automatically unload data from datataker DT80 to PC (Automatically unload data at 22:00 PM every day, then store to my PC).
Please help me the code.