Hi Team,
I have purchased a DataTaker DT82i to communicate with the flow meter and Temp sensor and to send that data to our IOT gateway.
I was able to configure Internal Tags and see that data in web interface using DEX 2.1.18 for Channel creation.
Able to read those Internal tags as well using Modbus TCP/IP, in PC but when I connected Datalogger to IOT gateway the Modbus status was ok b

What is it?

EVENT ,2019/12/10,10:28:39,0.813232,"Damaged accounts DB"
EVENT ,2019/12/10,10:28:39,0.901733,"Damaged accounts DB"
EVENT ,2019/12/10,10:28:49,0.803344,"Damaged accounts DB"
EVENT ,2019/12/10,10:28:49,0.905883,"Damaged accounts DB"
EVENT ,2019/12/10,10:28:59,0.780517,"Damaged accounts DB"
EVENT ,2019/12/10,10:29:00,0.089355,"Damaged accounts DB"
EVENT

Hi,

I had installed a DT85 series 4, then changed the memory from 128MB to 2GB, and started up the datataker.
After starting up the LCD shifted its messages to the right of the display tell only half of the massege was shown (for example ethernet IP was 192.168.8.100 but 192.168 only appears)

I made a hard reset and "Reset" command, but after the reset the display keeps shifting again

Hi.

I have recently bought a new DT80W-4 and started using the dEX-2 software for programming and downloading logged data.

I have one schedule running where signals from three load-cells and a thermocouple are recorded. The signals from the load cells are in mV and I convert it to kg by multiplying by a fixed factor.

The first columns in the csv-file become Timestamp and TZ as expec

Hi,

Recently i notice and read that to be able to see the configuration of your DT80 on the web is to migrate it in DEX2. Does it mean you will not be able to open the web portal since Adobe Flash is already EOL? Besides using DEX2 what other alternative can we use if we want to access the GUI on Web portal as we are accessing the dt80 via internet. Hope for your kind response. Thanks

i have problem when loading a program from a saved file.everytime i load the program,it will alter the calculation output(result) that will cause error when uploading the program to datataker.so everytime i want to resend the program to datataker,i need to re-do the calculation one by one. hope for a solution for this .thank you

Can anyone please give me an idea about how we connect three wire strain gauges to the data taker and what bridge configuration we should follow? I am using a DT85 model data taker.

If anyone can explain the basic things related to this or provide some useful links, it would be a great help as I am very new to data taker.

Thank You.

How do I save a program file to my PC, rather than the logger, using dEX2?

Dear Team,
I'm facing to the Flash that is out of date. I can not access to Dex software to configure data taker DT80. Please help to instruct me to configure it.
Thanks
Sang

Is there method could allow us to add more schedule in the program. now the schedule limit is A - K.

Hi,

I've been using a DT85 series 4 for logging several 4:20mA signals, and I'm configuring the DT-85 using DEX-2.
the DT85 had displayed all the signal correctly on its display, however when I tried sending a CSV file using FTP, nothing was sent to the FTP server.

her is the DXC

BEGIN"config"
'Generated by new dEX-2
password=""

S1=0,500,4,20""
S2=0,5000,4,20""

Dear Team,
I'm facing to the Flash that is out of date. I can not access to Dex software to configure data taker DT80. Please help to instruct me to configure it.
Thanks
Sang

how to download data in csv from data taker;DT80 with thumb drive

Hi,

Adobe Flash Player's end of life date is set to 31 december 2020. In my University, we rely on it in order to use dEx. I would like to know what solutions datataker is providing to adress this issue ? I've lookep this forums's threads but couldn't find any about this.

Regards,

Dear,
I'm trying to automatically unload data from datataker DT80 to PC (Automatically unload data at 22:00 PM every day, then store to my PC).
Please help me the code.

Hi,
I´m trying to send via serial a variable inside CV, also this I´m trying to send the timestamp.
How is the syntax to send the content of the variable via serial?
I tryed these:
1SERIAL("\w[500]\e{#001SCK<?(timestamp)>7A\013\010}\m[001SCK<>16]")
1SERIAL("\w[500]\e{#001SCK<?(500cv)>7A\013\010}\m[001SCK<>16]")

Best Regards

Neceel

I have dt80 at filed,how to access it via DTU? I means how can I visit it in office via internet.

Hello,
I am using a DT82E and I was wondering if there was a way to display/report the loggers internal temperature or tell what it is using as a cold junction compensation temperature for thermocouples. I am looking at the mV output and it must be compensating for the cold junction temperature, but I cannot tell where or how.

Hi all,
I have a DT80 series 4 , I want to connect a Power analyzer with RS485,
Protocol communication: Modbus RTU
• Baud rate : 4.8, 9.6, 19.2 kbps
• Parity number: Odd, Even, None
• Stop bit: 1,3
• Address: 1-247
• Connectors : 4 pole terminal ( integrated 120 Ohm terminator on T terminal ),
So, I need your help for the configura

Hi,

I have a problem.

We have several systems powered by a battery and a solar panel (12v 38Ah, 50W).

The problem is that when the weather is bad, the battery lasts a few days.

How can I make good energy savings?

Best Regards
Jonathan Maida